Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 769)

Brocade Mobility RFS Controller System Reference Guide 757
53-1003099-01
15
3. Select Wireless Clients from the RF Domain menu.
FIGURE 12 RF Domain - Wireless Clients screen
The Wireless Clients screen displays the following:
MAC Address Displays the hostname (MAC address) of each listed wireless client. This address is
hard-coded at the factory and can not be modified. The hostname address displays as a link
that can be selected to display configuration and network address information in greater
detail.
IP Address Displays the current IP address the wireless client is using for a network identifier.
Hostname Displays the unique administrator assigned hostname when the client’s configuration was
originally set.
Role Lists the role assigned to each controller, service platform or Access Point managed client.
Client Identity Lists the client’s operating system vendor identity (Android, Windows etc.)
Vendor Displays the vendor (or manufacturer) of the wireless client.
Band Lists the 2.4 or 5 GHz radio band the listed client is currently utilizing with its connected
Access Point, controller or service platform within the RF Domain.
AP Hostname Displays the administrator assigned hostname of the Access Point to which the client is
connected.
Radio MAC Lists the hardware encoded MAC address of the Access Point radio to which the client is
currently connected within the RF Domain.
WLAN Displays the name of the WLAN the wireless client is currently using for its interoperation
within the RF Domain.
VLAN Displays the VLAN ID the client’s connected Access Point has defined for use as a virtual
interface.
Last Active Displays the time when this wireless client was last detected by a RF Domain member.