Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 336)

324 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
6
FIGURE 41 Smart RF Scanning Configuration screen
NOTE
The monitoring and scanning parameters within the Scanning Configuration screen are only enabled
when Custom is selected as the Sensitivity setting from the Basic Configuration screen.
10. Enable or disable Smart Monitoring Enable. The feature is enabled by default.
When enabled, detector radios monitor their coverage areas for potential failed peers or
coverage area holes requiring transmission adjustments for coverage compensation.