Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 635)

Brocade Mobility RFS Controller System Reference Guide 623
53-1003099-01
11
1. Select Configuration > Services.
The upper, left-hand, side of the user interface displays a Services menu pane where Captive
Portal, DHCP and RADIUS configuration options can be selected.
2. Select Captive Portals.
The Captive Portal screen displays the configurations of existing policies. New policies can be
created, existing policies can be modified or existing policies deleted.
3. Select DNS Whitelist
FIGURE 6 Captive Portal DNS Whitelist screen
4. Review the names of existing whitelists and click Add to create a new whitelist entry or select
an existing whitelist and click Edit to modify it.
5. Use the DNS Whitelist parameter to create a set of allowed destination IP addresses.
To effectively host pages on an external Web server, the IP address of the destination Web
server(s) should be in the whitelist.
6. Refer to the drop-down menu of existing whitelist entries to select a policy to be applied to this
captive portal policy. If no entries exist, select the Create or Edit icons and follow the sub-steps
below:
a. If creating a new Whitelist, assign it a name up to 32 characters. Use the + Add button to
populate the Whitelist with Host and IP Index values.