Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 950)

938 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
The Multicast Router (MRouter) field displays the following:
DHCP Options
Network
Supported Access Points can use a DHCP server resource to provide the dynamic assignment of IP
addresses automatically. This is a protocol that includes IP address allocation and delivery of
host-specific configuration parameters from a DHCP server to a host. Some of these parameters
are IP address, gateway and network mask.
The DHCP Options screen provides the DHCP server name, image file on the DHCP server, and its
configuration.
To view a network’s DHCP Options:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select Network and expand the menu to reveal its sub menu items.
4. Select DHCP Options.
VLAN Displays the group VLAN where the multicast transmission is conducted.
Learn Mode Displays the learning mode used by the router as either Static or PIM-DVMRP.
Port Members Displays the ports on which multicast clients have been discovered by the multicast router. For example,
ge1, radio1, etc.
MiNT IDs Lists MiNT IDs for each listed VLAN. MiNT provides the means to secure Access Point profile
communications at the transport layer. Using MiNT, an Access Point can be configured to only
communicate with other authorized (MiNT enabled) Access Points of the same model.
Query Interval Lists the IGMP query interval implemented when the querier functionality is enabled. The default value
is 60 seconds.
Version Lists the multicast router IGMP version compatibility as either version 1, 2 or 3. The default setting is 3.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.