Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 275)

Brocade Mobility RFS Controller System Reference Guide 263
53-1003099-01
6
3. Select Security.
4. Refer to the MAC Registration section within the WLAN Policy security screen
FIGURE 10 WLAN Policy Security screen - MAC Registration
5. Select the Enable option if MAC address registration is required with the selected WLAN. This
feature is disabled by default.
Use the drop-down menu to select a RADIUS Group Name to associate with MAC registration. If
<none> is selected, devices are not associated with a RADIUS group.
Use the Expiry Time spinner control to set the amount of time before MAC registration addresses
expire and must be re-entered.
Set the Agreement Refresh as the amount of time before the agreement page is displayed if the
user has not been logged during the specified period. The default setting is 0 days.
Select enable within the External Controller option if WLAN authentication is handled using an
external resource. This feature is disabled by default.
If using an external authentication resource, use the drop-down menu to select either Hostname or
IP Address and enter the server information in the Host field.
If a proxy is needed for connection, choose a Proxy mode of either Through RF Domain Manager or
Through Wireless Controller. If no proxy is needed, select None.
6. Select OK when completed to update the MAC Registration settings. Select Reset to revert the
WLAN Policy Security screen back to the last saved configuration.
External Controller
Configuring WLAN Security
To set the WLAN’s external controller or service platform security configuration:
1. Select Configuration > Wireless > Wireless LAN Policy to display available WLANs.
2. Select the Add button to create an additional WLAN or select an existing WLAN and select Edit
to modify its properties.
3. Select Security.
4. Refer to the External Controller section within the WLAN Policy security screen