Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 519)

Brocade Mobility RFS Controller System Reference Guide 507
53-1003099-01
8
FIGURE 84 Profile - VRRP screen
3. Review the following VRRP configuration data to assess if a new VRRP configuration is required
or if an existing VRRP configuration requires modification or removal:
4. Select the Version tab to define the VRRP version scheme used with the configuration.
Virtual Router ID Lists a numerical index (1 - 254) used to differentiate VRRP configurations. The index is
assigned when a VRRP configuration is initially defined. This ID identifies the virtual router a
packet is reporting status for.
Description Displays a description assigned to the VRRP configuration when it was either created or
modified. The description is implemented to provide additional differentiation beyond the
numerical virtual router ID.
Virtual IP Addresses Lists the virtual interface IP address used as the redundant gateway address for the virtual
route.
Interface Displays the interfaces selected on the Access Point to supply VRRP redundancy failover
support.
Priority Lists a numerical value (1 - 254) used for the virtual router master election process. The
higher the numerical value, the higher the priority in the election process.