Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 623)

Brocade Mobility RFS Controller System Reference Guide 611
53-1003099-01
10
3. Select Add to create a new Device Categorization policy, Edit to modify the attributes of a
selected existing policy or Delete to remove obsolete policies from the list of those available.
FIGURE 30 WIPS Device Categorization Configuration screen
4. If creating a new Device Categorization policy, provide it a Name (up to 64 characters) to
distinguish this policy from others with similar configurations. Select OK to save the name and
enable the remaining parameters on the screen.
5. Select + Add Row to populate the Marked Devices field with parameters for adding an Access
Point’s MAC address, SSID, Access Point designation and network authorization. Select the red
(-) Delete Row icon as needed to remove an individual table entry.
6. Define the following parameters to add a device to a list of devices categorized as sanctioned
or unsanctioned for network operation:
Index Use the spinner controls to set the numerical Index number for each Device Categorization Name.