Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 523)

Brocade Mobility RFS Controller System Reference Guide 511
53-1003099-01
8
2. Select Critical Resources.
FIGURE 87 Critical Resources screen - List of Critical Resources tab
The screen lists the destination IP addresses or interfaces (VLAN, WWAN, or PPPoE) used for
critical resource connection. IP addresses can be monitored directly by the controller or service
platform, whereas a VLAN, WWAN or PPPoE must be monitored behind an interface.
3. Ensure the Activate Critical Resources Policy button is selected to enable the parameters
within the screen. This option needs to remain selected to apply the configuration to the
profile.
4. Click the Add button at the bottom of the screen to add a new critical resource and connection
method, or select and existing resource and select Edit to update the resource’s configuration.