Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 971)

Brocade Mobility RFS Controller System Reference Guide 959
53-1003099-01
15
This Client Blacklist displays blacklisted clients detected by this Access Point using WIPS.
Blacklisted clients are not allowed to associate to this Access Points.
To view the WIPS client blacklist for this Access Point:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select WIPS and expand the menu to reveal its sub menu items.
4. Select Client Blacklist.
FIGURE 153 Access Point - WIPS Client Blacklist screen
The WIPS Client Blacklist screen displays the following:
WIPS Events
WIPS
To view the WIPS events statistics:
1. Select the Statistics menu from the Web UI.
Event Name Displays the name of the event that resulted in the blacklisting.
Blacklisted Client Displays the MAC address of the unauthorized and blacklisted device intruding this Access Point’s radio
coverage area.
Time Blacklisted Displays the time when the client was blacklisted by this Access Point.
Total Time Displays the time the unauthorized (now blacklisted) device remained in this Access Point’s WLAN.
Time Left Displays the time the blacklisted client remains on the list.
Refresh Select the Refresh button to update the statistics counters to their latest values.