Plc designer v2.x| lenze application samples – Lenze PLC Designer V2.x User Manual
Page 119
Advertising
1.3 EN - 07/2012
L
119
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9400 HighLine - "LAS_40_INTF_Can_94HL_TabPos" sample project
Reading a parameter - L_SCB_ParRead function block
Further information on the FB can be found in the following section:
L_SCB_ParRead - read parameter
Actuation of the controller
Status of the controller
Read out parameter
CAN address
Number of the CAN master
Parameter index
Basic value code no. 24575 - C11 = 24564
Parameter subindex
Use second SDO
Parameter read out
Function block active
Reading out parameter has failed
Time-out
Parameter display
Number of bytes read
Advertising