Lenze PLC Designer V2.x - Manual (Page 136)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS servo system - "LAS_40_INTF_Can_ECSPosShaft" sample project
136
L
1.3 EN - 07/2012
8.5.6.2 Automatic mode
 Button  selects the automatic mode.
 Button  starts the motion profile.
 Button  inhibits the motion profile.
 Display field  shows the mode status.
 Display field  shows the current profile number.
 Display field  shows the set position.
 Dialog box  shows the current position (Actual Position variable).
 Select mode  Stop button  Current profile
number
 Current position
 Start button  Mode status  Set position