Plc designer v2.x| lenze application samples – Lenze PLC Designer V2.x User Manual
Page 94
Advertising
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9400 HighLine - "LAS_40_INTF_Can_94HL_Speed" sample project
94
L
1.3 EN - 07/2012
Read out error
Further information on the FB can be found in the following
section:
L_S94_ReadErrorCode - read out error status
Actuation of the controller
Status of the controller
Read out error
CAN address
Number of the CAN master
Use second SDO
Error text display
Error read out
Function block active
Reading out error has failed
Advertising