Lenze PLC Designer V2.x - Manual (Page 141)

1.3 EN - 07/2012
L
141
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS servo system - "LAS_40_INTF_Can_ECSPosShaft" sample project
8.5.6.4 Service mode
 Button  selects the service mode.
 Button  starts the motion profile.
 Button  inhibits the motion profile.
 Button selects CW rotation (activates CW direction of rotation).
 Display field  indicates the mode status.
 Display field  indicates the current speed (variable Speed Value).
 Display field  shows the current speed setpoint.
– Possible setpoint data for the motion profile: 0 ... 100%.
 In area , status information is displayed and errors can be reset.
 Select mode  Stop button  Mode status  Setpoint speed
 Start button  Activate clockwise
rotation
 Actual speed