Lenze PLC Designer V2.x - Manual (Page 170)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9300 servo - "LAS_40_INTF_Can_93_Speed" sample project
170
L
1.3 EN - 07/2012
3. Select the menu command Drive parametersRead all parameter sets from file
• Open the project "LAS_40_INTF_Can_93Speed.GDC":
4. Transfer the project to the controller with F5.
• Click Replacement device.
The device file is loaded as replacement device and all important parameters are
transferred to the controller.