Lenze PLC Designer V2.x - Manual (Page 31)

1.3 EN - 07/2012
L
31
PLC Designer V2.x| Lenze Application Samples
Commissioning the CANopen Logic bus
Preparing the restart
6.3.1 Special features of the 9400 Servo Drives HighLine
Servo Drives 9400 are not purely parameterisable devices. They require an application
download, where several files are transmitted to the memory module.
To put a Servo Drive 9400 into operation, you can:
 plug on the memory module.
 transmit the application using the »Engineer«. For this, you must keep the original
»Engineer« project.
 transmit the application using the L-force »Loader«. For this, you must export and keep
the required files from the »Engineer« project: