Lenze PLC Designer V2.x User Manual
Page 154
Advertising
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8200 vector - "LAS_40_INTF_Can_82_Speed" sample project
154
L
1.3 EN - 07/2012
"Drive" program
The "DRIVE (PRG)" program actuates the controller by means of the
L_S82_ActuatorSpeed1 function block.
By selecting the CAN node ID (byNodeNumber) and the CAN master node number
(byMasterNumber), the data can be copied to the control configuration.
The DriveControl and DriveStatus structures serve to transmit the control and status
signals.
"PLC_PRG" program
The "PLC_PRG (PRG)" program contains all program calls.
Advertising