Lenze PLC Designer V2.x - Manual (Page 143)

1.3 EN - 07/2012
L
143
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS servo system - "LAS_40_INTF_Can_ECSPosShaft" sample project
8.5.6.6 Parameter transfer
The Parameter button selects the visualisation of the parameter FBs.
 The mode selected last remains active.
 You can use the FBs to...
– read individual parameters
– write individual parameters
– write a fixed parameter list
 Area  shows the FB for reading parameters.
 Area  shows the FB for writing a parameter table.
 Area  shows the FB for writing parameters.
 Read parameters  Write parameters
 Write parameter table