Lenze PLC Designer V2.x - Manual (Page 197)

1.3 EN - 07/2012
L
197
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9300 - "LAS_40_INTF_Can_93_EP" sample project
8.8.5 Operation via the visualisations in the »PLC Designer«
8.8.5.1 Information/home page
 Via the buttons in area , the mode (automatic, manual, service, homing) can be
selected.
 In area  services (parameter transfer and CAN diagnostics) can be selected.
 The button in area  refers to the home page which displays the version identifier of
the project in area .
 Dialog box shows the status of the machine.
 Control field  shows the error message status.
– The Error Reset button resets the error message.
 Select mode  Manufacturer information  Version identifier  Error message
 Parameter
selection
 Information/home page  Status