Lenze PLC Designer V2.x - Manual (Page 191)

1.3 EN - 07/2012
L
191
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9300 - "LAS_40_INTF_Can_93_EP" sample project
3. Select the menu command Drive parametersRead all parameter sets from file
• Open the project LAS_40_INTF_Can_93Pos.GDC :
4. Transfer the project to the controller with F5.
• Click Replacement device.
The device file is loaded as replacement device and all important parameters are
transferred to the controller.
5. Use the wizard and select a motor: