Lenze PLC Designer V2.x - Manual (Page 127)

1.3 EN - 07/2012
L
127
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS servo system - "LAS_40_INTF_Can_ECSPosShaft" sample project
8.5.4 Open the »Global Drive Control« project & go online

How to open the sample project in the »Global Drive Control«:
1. Start »Global Drive Control«
• Search for controller (F2):
Use F2 to call the Connect with drive dialog box:
Click Connect to activate the search process and establish an online connection to
the drive.
• The parameters of the connected controllers are read.
2. The ECSxP is found at address 5 and the corresponding device description is loaded.

Detailed infomation on the general handling of »Global Drive Control« can be
found in the online help for the »Global Drive Control«, which you can call with
[F1].