Lenze PLC Designer V2.x - Manual (Page 160)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8200 vector - "LAS_40_INTF_Can_82_Speed" sample project
160
L
1.3 EN - 07/2012
8.6.5.4 Service mode
 Button  selects the service mode.
 Button  starts the motion profile.
 Button  inhibits the motion profile.
 Button selects clockwise rotation (clockwise rotating direction of the motor).
 Display field  indicates the status of the mode.
 Display field  indicates the current speed (variable Speed Value).
 Display field  shows the current speed setpoint.
– Possible setpoint data for the motion profile: 0 ... 100%.
 In area , status information is displayed and errors can be reset.
 Select mode  Stop button  Status of the service mode
 Start button  Activate clockwise
rotation (Cw)
 Actual speed  Setpoint speed