2 automatic mode, Automatic mode, Plc designer v2.x| lenze application samples – Lenze PLC Designer V2.x User Manual
Page 49
Advertising
1.3 EN - 07/2012
L
49
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8400 StateLine - "LAS_40_INTF_Can_84SL_Speed" sample project
8.1.4.2
Automatic mode
Button selects the automatic mode.
Button starts the motion profile.
Button inhibits the motion profile.
Display field shows the mode status.
Display field shows the current speed (Speed Value variable).
Dialog box shows the status of the machine.
Control field activates the error group signal.
– The Error Reset button resets the error message.
Select mode
Stop button
Actual speed
Error message
Start button
Status
Status
Advertising