2 automatic mode, Automatic mode, Plc designer v2.x| lenze application samples – Lenze PLC Designer V2.x User Manual
Page 156
Advertising
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8200 vector - "LAS_40_INTF_Can_82_Speed" sample project
156
L
1.3 EN - 07/2012
8.6.5.2
Automatic mode
Button selects the automatic mode.
Button starts the motion profile.
Button inhibits the motion profile.
Display field shows the mode status.
Display field shows the current speed (Speed Value variable).
Dialog box shows the status of the machine.
Control field shows the error message status.
– The Error Reset button resets the error message.
Select mode
Stop button
Actual speed
Error message
Start button
Status
Status
Advertising