1 installation – Lenze PLC Designer V2.x User Manual
Page 24
PLC Designer V2.x| Lenze Application Samples
Requirements
Where can I receive a full version of the PLC Designer?
24
L
1.3 EN - 07/2012
4.3
Where can I receive a full version of the PLC Designer?
The »PLC Designer« is provided for download in the Lenze Application Knowledge Base
(AKB) :
The AKB is a product- and application-oriented collection of information provided by Lenze.
Alternatively you can install the »PLC Designer« from the CD supplied with the
Industrial PC.
4.3.1
Installation
How to install the »PLC Designer«:
1. Select »PLC Designer« to save the full version as a packed ZIP file on your PC
(Engineering PC).
• Unpack the ZIP file PlcDesigner_V2.3.x.zip on your PC (file size approximately
45MB).
• The ZIP file contains an installation file.
or
Start the PLCDesigner_V2.3..x.exe installation file from the CD supplied with the
Industrial PC.
2. Start the EXE file and follow the installation instructions
3. After the installation the »PLC Designer« can be started.
If the »PLC Designer« is already installed, carry out an update of the version available or
install the full version parallel to the version available.
Installing the target systems
Furthermore the »PLC Designer« target setup has to be installed, containing the
information required for controlling the target systems.
For the installation, proceed like for the installation of the »PLC Designer«.
Further information and basics regarding the »PLC Designer« can be found in the
following documentation:
PLC Designer software manual
The manual is available on the CD supplied or on the Internet.