Lenze PLC Designer V2.x - Manual (Page 151)

1.3 EN - 07/2012
L
151
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8200 vector - "LAS_40_INTF_Can_82_Speed" sample project
transferred to the controller.
Note!
The data in the 8200 vector must not necessarily be saved, since the parameters
are written directly into the EEPROM.
4. Use the wizard and select a motor:
Use code C0003 to save parameter set 1 in the EEPROM safe against mains failure
(C0003 = 1).