Lenze PLC Designer V2.x - Manual (Page 37)

1.3 EN - 07/2012
L
37
PLC Designer V2.x| Lenze Application Samples
Commissioning a sample project
Opening a project in the »PLC Designer«
7.3 Opening a project in the »PLC Designer«
 The project contains all objects of a control program.
 A project is saved in a file. The file name complies with the project name.
In the case of a standard installation you start the »PLC Designer« at the Engineering PC
via:
StartLenzePLC Designer V2.3.xPLC Designer
After starting the »PLC Designer«, a project can be loaded under FileOpen.
• Project files can be identified by the ending *.pro.
• Select the *.pro file type from the selection list to display the project files
available.