Lenze PLC Designer V2.x - Manual (Page 219)

1.3 EN - 07/2012
L
219
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS/9400/8400 - "LAS_40_INTF_84SL_Speed_94HL_Speed_ECSPosShaft" sample project
8.9.3.2 Automatic mode
 Button  selects the automatic mode.
 In the area - the automatic modes of the respective controller are shown:
: ECS xP
 Select mode ECS xP (ID=0)
9400 HighLine
8400 StateLine

• CAN status
• Error message
display
• Error reset

Start: start sequence
Stop: stop sequence

Mode status 
Current profile
number

Set position

Actual position