6 can diagnostics, Can diagnostics, Plc designer v2.x| lenze application samples – Lenze PLC Designer V2.x User Manual
Page 99
Advertising
1.3 EN - 07/2012
L
99
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9400 HighLine - "LAS_40_INTF_Can_94HL_Speed" sample project
8.3.4.6
CAN diagnostics
The CanDiagnostic button selects the diagnostics of the CAN bus.
The mode selected last remains active.
This area shows the status of the master and slaves, which are integrated in the control
configuration.
Status of the CAN master (ID=0)
Status of the CAN slave (node-ID=5)
Advertising