Lenze PLC Designer V2.x - Manual (Page 224)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS/9400/8400 - "LAS_40_INTF_84SL_Speed_94HL_Speed_ECSPosShaft" sample project
224
L
1.3 EN - 07/2012
8.9.3.6 Parameter transfer
The Parameter button selects the visualisation of the parameter FBs.
 The mode selected last remains active.
 You can use the FBs to...
– read individual parameters
– write individual parameters
– write a fixed parameter list
– Further information on the parameter transfer (visualisation) of the ECS can be
found in the following section:  Parameter transfer ( 143)
–
– Further information on the parameter transfer (visualisation) of the 9400 HighLine
can be found in the following section:  Parameter transfer
( 96)
– Further information on the parameter transfer (visualisation) of the 8400 StateLine
can be found in the following section:  Parameter transfer
( 54)
 Select mode ECS xP (ID=0)
9400 HighLine
8400 StateLine