Lenze PLC Designer V2.x - Manual (Page 128)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS servo system - "LAS_40_INTF_Can_ECSPosShaft" sample project
128
L
1.3 EN - 07/2012
3. Select the menu command Drive parametersRead all parameter sets from file
• Open the parameter set from the directory ....\Program
Files\Lenze\AppSamples_XXXX\ LAS_40_INTF_Can_ECSPosShaft
_XXXX\LAS_40_INTF_Can_ECSPosShaft.gdc: