Lenze PLC Designer V2.x - Manual (Page 23)

1.3 EN - 07/2012
L
23
PLC Designer V2.x| Lenze Application Samples
Requirements
System requirements
4 Requirements
4.1 System requirements
4.2 What is the PLC Designer?
The »PLC Designer« is a Lenze engineering software for programming the PLC of the Lenze
Industrial PC.
Properties
 Five different editors for the programming languages standardised in the IEC 61131-3,
and a very powerful CFC editor are provided. They serve to create individual programs,
and to trigger the functions of our L-force Logic & Motion runtime software.
 By means of the integrated visualisation the processes are shown, in order to obtain all
important pieces of information at a glance during commissioning.
Engineering PC IPC (controller)
Hardware PC/notebook Industrial PC with PLC (Logic) from
firmware V2.0
Operating system Windows XP Windows CE
Lenze software required »PLC Designer« V2.2.4.x L-force Logic
Further requirements • 100 MB of free hard disk memory • CAN bus system
• CAN nodes (depending on the
respective example application)