Lenze PLC Designer V2.x - Manual (Page 39)

1.3 EN - 07/2012
L
39
PLC Designer V2.x| Lenze Application Samples
Commissioning a sample project
Opening a project in the »PLC Designer«

Tip!
If the project is to be loaded automatically after a restart of the device, you can
install it as "Boot project".

How to install the project as boot project:
1. Open the Online menu in the menu bar
2. Select the Create boot project command.
• A dialog window is opened, displaying the files created.
3. Click OK to close the dialog window.