2 automatic mode, Automatic mode, Plc designer v2.x| lenze application samples – Lenze PLC Designer V2.x User Manual
Page 198
Advertising
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9300 - "LAS_40_INTF_Can_93_EP" sample project
198
L
1.3 EN - 07/2012
8.8.5.2
Automatic mode
Button selects the automatic mode.
Button starts the motion profile.
Button inhibits the motion profile.
Display field shows the mode status.
Display field shows the current profile number.
Display field shows the set position.
Dialog box shows the current position (Actual Position variable).
Select mode
Stop button
Current profile
number
Current position
Start button
Mode status
Set position
Advertising