Lenze PLC Designer V2.x - Manual (Page 176)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9300 servo - "LAS_40_INTF_Can_93_Speed" sample project
176
L
1.3 EN - 07/2012
8.7.5.2 Automatic mode
 Button  selects the automatic mode.
 Button  starts the motion profile.
 Button  inhibits the motion profile.
 Display field  shows the mode status.
 Display field  shows the current speed (Speed Value variable).
 Dialog box shows the status of the machine.
 Control field  shows the error message status.
– The Error Reset button resets the error message.
 Select mode  Stop button  Actual speed  Error message
 Start button  Status  Status