Lenze PLC Designer V2.x - Manual (Page 221)

1.3 EN - 07/2012
L
221
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS/9400/8400 - "LAS_40_INTF_84SL_Speed_94HL_Speed_ECSPosShaft" sample project
8.9.3.3 Manual mode ("Manual jog")
 Button  selects the manual (manual jog) mode.
 The - buttons start the manual mode for the respective controller.
– Further information on the visualisation of the manual mode of the ECS can be found
in the following section:  Manual mode ("Manual jog")
( 137)
–
– Further information on the manual mode of the 9400 HighLine can be found in the
following section:  Manual mode ("Manual jog")
( 92)
– Further information on the manual mode of the 8400 StateLine can be found in the
following section:

Manual mode ("Manual jog")
( 50)
–
 Select mode ECS xP (ID=0)
9400 HighLine
8400 StateLine