Lenze PLC Designer V2.x - Manual (Page 150)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8200 vector - "LAS_40_INTF_Can_82_Speed" sample project
150
L
1.3 EN - 07/2012
Further information on the setting parameters of the CAN bus can be found in the
dialog window Selection of communication driver (menu command
OptionCommunication).
2. Select the menu command Drive parametersRead all parameter sets from file
• Open the parameter set from the directory ....\Program
Files\Lenze\AppSamples_XXXX\ LAS_40_INTF_Can_82_Speed _XXXX\
LAS_40_INTF_Can_82_Speed_XXXX.gdc.
3. Transfer the project to the controller with F5.
• Click Replacement device.
The device file is loaded as replacement device and all important parameters are