Lenze PLC Designer V2.x - Manual (Page 310)

PLC Designer V2.x| Lenze Application Samples
The L_SDC_DataConversion.lib library
L_SDC_ResetBitOfByte - conversion block
310
L
1.3 EN - 07/2012
Outputs
18.15 L_SDC_ResetBitOfByte - conversion block
This function sets an individual bit to "0" within a value of the "BYTE" type.
Inputs
Output signal
L_SDC_ResetBitOfByte: New value of the "BYTE" type, which results by the bit deleted.
Identifier/data type Value/meaning
dwVersion
DWORD
Output version
Identifier/data type Information/possible settings
byInput
BYTE
Input signal
byBitNr
BYTE
Number (0 ... 7) of the bit that is to be set.