Lenze PLC Designer V2.x - Manual (Page 229)

1.3 EN - 07/2012
L
229
PLC Designer V2.x| Lenze Application Samples
Adding other components
Copying and inserting nodes of the same series
9.1.1 Establishing the connection between the visualisation and the FB

How to connect the visualisation to the FB:
1. Select the required FB with a double-click ( ).
2. Click the Wildcard button in the Visualisations dialog box
( ).
3. Replace wildcard
4. Confirm with OK ( ).
After integrating Drive_1(PRG) in the PLC_PRG(PRG) program, error-free compiling and
downloading it to the PLC, the extended controller can be controlled manually.
 In the visualisation resources part
(Visualisations tab), you can...
– ...then copy the B_Manual part
– ...and rename it for instance to
B_Manual_1.
 After this, establish the wildcard (the
connection to the function block).