Rockwell Automation 284 ArmorStart User Manual - Manual (Page 100)

4-10 Bulletin 283 Programmable Parameters
Produced Assy Word 1
This parameter is used to build
bytes 2-3 for produced assembly
120
Parameter Number 14
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 116
Default Value 4
Prod Assy Word 2
This parameter is used to build
bytes 4-5 for produced assembly
120
Parameter Number 15
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 116
Default Value 5
Prod Assy Word 3
This parameter is used to build
bytes 6-7 for produced assembly
120
Parameter Number 16
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 116
Default Value 6
Consumed I/O Size
This parameter reflects the
consumed I/O data size in bytes.
Parameter Number 17
Access Rule GET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 8
Default Value 2
Produced I/O Size
This parameter reflects the
produced I/O data size in bytes.
Parameter Number 18
Access Rule GET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 8
Default Value 2