Rockwell Automation 284 ArmorStart User Manual User Manual
Page 47
Advertising
![background image](/manuals/577766/47/background.png)
Installation and Wiring
2-23
Figure 2.23 Bulletin 284 ArmorStart
①
Available only with the Bulletin 284 with sensorless vector con-
trol.
Figure 2.24 Bulletin 284 ArmorStart with ArmorConnect
LED Status
Indication
Motor
Connector
ArmorPoint
Interface
(Out)
Local Disconnect
2 Outputs
(Micro/M12)
Dynamic
Brake Connector
Source/Control Brake
Connector
0
…
10V Analog
①
Input Connector
ArmorPoint
Interface
(In)
Control
Control Power
Three-Phase Power
Three-Phase Power
Ground
Terminal
Ground
Power
Terminal
Advertising
This manual is related to the following products: