Rockwell Automation 284 ArmorStart User Manual - Manual (Page 209)

Bulletin 284 Programmable Parameters for Sensorless Vector Controllers 6-35
Opto Out Logic
Determines the logic (Normally Open/N.O. or Normally Closed/N.C.) of the opto
outputs. Parameter Number 164
Access Rule GET/SET
Data Type UINT
Group Advanced Program Group
Units 1
Minimum Value 0
Maximum Value 3
Default Value 0
Option Opto Out1 Logic Opto Out2 Logic
0 N.O. (Normally Open) N.O. (Normally Open)
1 N.C. (Normally Closed) N.O. (Normally Open)
2 N.O. (Normally Open) N.C. (Normally Closed)
3 N.C. (Normally Closed) N.C. (Normally Closed)