Rockwell Automation 284 ArmorStart User Manual - Manual (Page 387)

Bulletin 283 CIP Information C-15
Table C.33 Connection Object Instance 8-11 Attributes
The following services are implemented for the Connection Object:
Table C.34 Connection Objects Common Services
Attribute
ID
Access
Rule
Name Data Type Value
1 Get State USINT
0=nonexistant
1=configuring
3=established
2 Get Instance Type USINT 1=I/O Connection
3 Get Transport Class Trigger USINT
0x20 (COS,
unacknowledged)
4 Get Produced Connection ID UINT FFFF (not producing data)
5 Get Consumed Connection ID UINT
01101xxxxxx
xxxxxx=node address
6 Get Initial Comm Characteristics USINT 0xF0 (unacknowledged)
7 Get Produced Connection Size UINT 0
8 Get Consumed Connection Size UINT 8
9 Get/Set Expected Packet Rate UINT in milliseconds
12 Get Watchdog Action USINT 2=auto reset
13 Get Produced Connection Path Length UINT 0
14 Get Produced Connection Path 0
15 Get Consumed Connection Path Length UINT 8
16 Get Consumed Connection Path 21 0E 03 25 01 00 30 02
Service
Code
Implemented for:
Service
Name
Class Instance
0x05 No Yes Reset
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single