Rockwell Automation 284 ArmorStart User Manual - Manual (Page 132)

5-10 Bulletin 284 Programmable Parameters for Volts per Hertz Controllers
Prod Assy Word 2
This parameter is used to build bytes 4-5 for produced assembly 120. Parameter Number 15
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 216
Default Value 5
Prod Assy Word 3
This parameter is used to build bytes 6-7 for produced assembly 120. Parameter Number 16
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 216
Default Value 6
Consumer I/O Size
This parameter maps to the Scanner Tx Size. Parameter Number 17
Access Rule GET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 8
Default Value 4
Produced I/O Size
This parameter maps to the Scanners Rx Size. Parameter Number 18
Access Rule GET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 8
Default Value 4