Rockwell Automation 284 ArmorStart User Manual User Manual
Page 427
Bulletin 284 CIP Information
D-27
The following common services are implemented for the Parameter
Object
Table D.49 Parameter Object Common Services:
Parameter Group Object — CLASS CODE 0x0010
The following class attributes are supported for the Parameter Object
Table D.50 Parameter Group Object Class Attributes:
All Bulletin 284 Motor Starters have the following instances of the
parameter group object:
•
Instance 1 = DeviceLogix Parameters
•
Instance 2 = DeviceNet Parameters
•
Instance 3 = Starter Protection Parameters
•
Instance 4 = User I/O Parameters
•
Instance 5 = Miscellaneous
•
Instance 6 = Drive DNet
•
Instance 7 = ZIP Parameters
•
Instance 8 = Basic Display
•
Instance 9 = Basic Program
•
Instance 10 = Advanced Program
Service
Code
Implemented for
Service
Name
Class
Instance
0x0E
Yes
Yes
Get_Attribute_Single
0x10
No
Yes
Set_Attribute_Single
0x01
No
Yes
Get_Attributes_All
Attribute ID
Access Rule
Name
Data Type
1
Get
Revision
UINT
2
Get
Max Instance
UINT