Rockwell Automation 284 ArmorStart User Manual - Manual (Page 414)

D-14 Bulletin 284 CIP Information
Instance 2 is the Predefined Group 2 Connection Set Polled I/O
Message Connection. The following Instance 2 attributes are
supported
Table D.35 Connection Object Instance 2 Attributes:
Attribute
ID
Access Name
Data
Type
Value
1 Get
State
USINT
0 = non-existent
1 = configuring
3 = established
4 = timed out
2 Get Instance Type USINT 1 = I/O Connection
3 Get
Transport Class Trigger
USINT
0x82 — Server,
Transport Class 2 (If
alloc_choice != polled
and ack suppression is
enabled then value =
0x80)
4 Get
Produced Connection ID
UINT
01111xxxxxx
xxxxxx = node address
5 Get
Consumed Connection ID
UINT
10xxxxxx101
xxxxxx = node address
6 Get Initial Comm Characteristics USINT 0x21
7 Get Produced Connection Size UINT 0…8
8 Get Consumed Connection Size UINT 0…8
9 Get/Set Expected Packet Rate UINT in milliseconds
12 Get/Set
Watchdog Action
USINT
0 = transition to timed
out
1 = auto delete
2 = auto reset
13 Get
Produced Connection Path
Length
UINT
8
14 Get/Set
Produced Connection Path 21 04 00 25 (assy inst)
00 30 03
15 Get
Consumed Connection Path
Length
UINT
8
16 Get/Set
Consumed Connection Path 21 04 00 25 (assy inst)
00 30 03