Rockwell Automation 284 ArmorStart User Manual - Manual (Page 52)

2-28 Installation and Wiring
Operation of NEMA Type 4X
Disconnect Handle To Open Disconnect Handle
1. Rotate locking ring 45° until it stops.
2. To open, push the tab on the left-hand side and lift the access
cover.
Note: The access door can not be closed when 140 (black handle) is
in the OFF position.
To Close Disconnect Handle for Lockout/Tag out
With disconnect handle in the ON position, rotate lockout/tag out ring
counterclockwise until the disconnect handle is in the OFF position.
Note: The disconnect handle is designed to be used with a 1/4 in.
lockout/tag out padlock.