Optional locking clip – Rockwell Automation 284 ArmorStart User Manual User Manual
Page 51
Advertising
![background image](/manuals/577766/51/background.png)
Installation and Wiring
2-27
Optional Locking Clip
The clam shell design clips over the ArmorStart motor connector and
motor cable to limit customer access from disconnecting the motor
cable on the ArmorStart Distributed Motor Controller. The locking
clip is an optional device that can be used, if desired.
Figure 2.28 Bulletin 280/281Installation of Locking Clip
Figure 2.29 Bulletin 283/284 Installation of Locking Clip
Advertising
This manual is related to the following products: