Rockwell Automation 284 ArmorStart User Manual User Manual
Page 19
Product Overview
1-7
LED Status Indication
The LED Status Indication provides 4 status LEDs and a Reset
button. The LEDs provide status indication for the following:
•
POWER LED
The LED is illuminated solid green when control power is present
and with the proper polarity
•
RUN LED
This LED is illuminated solid green when a start command and
control power are present
•
NETWORK LED
This bi-color (red/green) LED indicates the status of the
communication link
•
FAULT LED
Indicates Controller Fault (Trip) condition
The “Reset Button” acts as a local trip reset.
Figure 1.4 Status Indication and Reset
Fault Diagnostics
Fault diagnostics capabilities built in the ArmorStart Distributed
Motor Controller help you pinpoint a problem for easy
troubleshooting and quick re-starting.
➊
Not available on the Bulletin 280A/281A., 283A, or 284A.
Fault Indication
Available on Bulletin:
Fault Indication
Available on Bulletin:
280/281
283
284
280/281
283
284
•
Short Circuit
X
X
X
•
Miscellaneous Fault
X
X
•
Overload
X
X
X
•
Brake Fuse Detection
X
X
•
Phase Loss
X
X
X
•
Internal Comm. Fault
X
X
•
Control Power Loss
X
X
X
•
Shorted SCR
X
•
Control Power Fuse Detection
X
X
X
•
Phase Rotation
X
•
Output Power Fuse Detection
X
X
X
•
Heatsink Temperature Fault
X
•
I/O Fault
X
X
X
•
DC Bus Fault
X
•
Over Temperature
X
X
X
•
Ground Fault
X
•
DeviceNet™ Power Loss ➊
X
X
X
•
Overcurrent
X
•
EEprom Fault
X
X
X
•
Restart Retries
X
•
Hardware Fault
X
X
X
•
Stall
X
•
Phase Imbalance
X
X
•
Phase Short
X