Rockwell Automation 284 ArmorStart User Manual - Manual (Page 147)

Bulletin 284 Programmable Parameters for Volts per Hertz Controllers 5-25
Zone #3 MAC ID
The node address of the device whose data is to be consumed for zone 3. When set
to the value 64, data consumption is disabled.
Parameter Number 72
Access Rule GET/SET
Data Type USINT
Group ZIP Parameters
Units —
Minimum Value 0
Maximum Value 64
Default Value 64
Zone #4 MAC ID
The node address of the device whose data is to be consumed for zone 4. When set
to the value 64, data consumption is disabled.
Parameter Number 73
Access Rule GET/SET
Data Type USINT
Group ZIP Parameters
Units —
Minimum Value 0
Maximum Value 64
Default Value 64
Zone #1 Health
Read Only consumed connection status for zone 1
0 = Healthy
1 = Unhealthy
Parameter Number 74
Access Rule GET
Data Type BOOL
Group ZIP Parameters
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
Zone #2 Health
Read Only consumed connection status for zone 2
0 = Healthy
1 = Unhealthy
Parameter Number 75
Access Rule GET
Data Type BOOL
Group ZIP Parameters
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
Zone #3 Health
Read Only consumed connection status for zone 3
0 = Healthy
1 = Unhealthy
Parameter Number 76
Access Rule GET
Data Type BOOL
Group ZIP Parameters
Units —
Minimum Value 0
Maximum Value 1
Default Value 0