Rockwell Automation 284 ArmorStart User Manual User Manual
Page 478
J-6
Step Logic, Basic Logic and Timer/Counter Functions
9
Step if Logic In1 is active (logically true) and Logic In2 is not active (logically false).
XOR
A
Step if Logic In2 is active (logically true) and Logic In1 is not active (logically false).
XOR
b
Step after (Stp Logic Time x) and Logic In1 is active (logically true).
TIMED AND
C
Step after (Stp Logic Time x) and Logic In2 is active (logically true).
TIMED AND
d
Step after (Stp Logic Time x) and Logic In1 is not active (logically false).
TIMED OR
E
Step after (Stp Logic Time x) and Logic In2 is not active (logically false).
TIMED OR
F
Do not step OR no jump to, so use Digit 0 logic.
IGNORE
Setting
Description
Logic
0
Skip Step (jump immediately).
SKIP
1
Step based on the time programmed in the respective (Stp Logic Time x) parameter.
TIMED
2
Step if Logic In1 is active (logically true).
TRUE
3
Step if Logic In2 is active (logically true).
TRUE
4
Step if Logic In1 is not active (logically false).
FALSE
5
Step if Logic In2 is not active (logically false).
FALSE
6
Step if either Logic In1 or Logic In2 is active (logically true).
OR
7
Step if both Logic In1 and Logic In2 is active (logically true).
AND
8
Step if neither Logic In1 or Logic In2 is active (logically true).
NOR
9
Step if Logic In1 is active (logically true) and Logic In2 is not active (logically false).
XOR
A
Step if Logic In2 is active (logically true) and Logic In1 is not active (logically false).
XOR
b
Step after (Stp Logic Time x) and Logic In1 is active (logically true).
TIMED AND
C
Step after (Stp Logic Time x) and Logic In2 is active (logically true).
TIMED AND
d
Step after (Stp Logic Time x) and Logic In1 is not active (logically false).
TIMED OR
E
Step after (Stp Logic Time x) and Logic In2 is not active (logically false).
TIMED OR
F
Use logic programmed in Digit 1.
IGNORE
Setting
Description
Logic